View LP173WF1-TLC1_6955482.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

product specification 1/ 26 lp173wf1 liquid crystal display ver. 1.0 jan.18.2010 specification for approval title 17.3? fhd tft lcd buyer sony model supplier lg display co., ltd. *model lp173wf1 suffix tlc1 *when you obtain standard approval, please use the above model name without suffix signature please return 1 copy for your confirmation with your signature and comments. / / / approved by ( ) preliminary specification ( ) final specification h. s. kim / s.manager product engineering dept. lg display co., ltd approved by signature reviewed by prepared by m. j. lee / manager j. y. lee / engineer s. w. kim / engineer www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 2/ 26 lp173wf1 liquid crystal display ver. 1.0 jan.18.2010 contents no item page cover 1 contents 2 record of revisions 3 1 general description 4 2 absolute maximum ratings 5 3 electrical specifications 3-1 electrical charactreistics 6 3-2 interface connections 8 3-3 lvds signal timing specifications 9 3-4 signal timing specifications 11 3-5 signal timing waveforms 11 3-6 color input data refernece 12 3-7 power sequence 13 4 optical sfecifications 14 5 mechanical characteristics 17 6 reliablity 27 7 international standards 7-1 safety 28 7-2 emc 28 7-3 environment 28 8 packing 8-1 designation of lot mark 29 8-2 packing form 29 9 precautions 30-31 www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 3/ 26 lp173wf1 liquid crystal display ver. 1.0 jan.18.2010 record of revisions revision no revision date page description edid ver 0.0 oct. 15. 2009 - first draft none 1.0 jan. 18. 2010 - final cas ver1.0 none www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 4/ 26 lp173wf1 liquid crystal display ver. 1.0 jan.18.2010 1. general description active screen size 17.3 inches diagonal outline dimension 398.1(h, typ.) 232.8(v, typ.) 6.0(d, max.) mm pixel pitch 0.1989 x 0.1989 mm pixel format 1920 horiz. by 1080 vert. pixels rgb strip arrangement color depth 6-bit, 262,144 colors luminance, white 200 cd/m 2 (typ., @ i led =22ma) power consumption total 8.5w(typ.) logic : 2.0w (typ.@ mosaic), b/l : 6.5w (typ.@ vled 12v ) weight 580g (max.) display operating mode transmissive mode, normally white surface treatment glare treatment (3h) of the front polarizer rohs compliance yes bfr / pvc / as free yes for all the lp173wf1 is a color active matrix liquid crystal display with an integral led backlight system. the matrix employs a-si thin film transistor as the active element. it is a transmissive type display operating in the normally white mode. this tft-lcd has 17.3 inc hes diagonally measured active display area with fhd resolution (1920 horizontal by 1080 vertical pixel array). each pixel is divided into red, green and blue sub- pixels or dots which are arranged in vertical stripes. gray scale or the brightness of the sub-pixel color is determined with a 6-bit gray scale signal for each dot, thus, presenting a palette of more than 262,144 colors. the lp173wf1 has been designed to apply the interface method that enables low power, high speed, low emi. the lp173wf1 is intended to support applications where thin thickness, low power are critical factors and graphic displays are important. in combination with the vertical arrangement of the sub- pixels, the lp173wf1 characteristics provide an excellent flat display for office automation products such as notebook pc. general features control & data power edid signal & power tft-lcd panel (fhd, gip, tn) 1 timing control (tcon) block timing control (tcon) block user connector 40 pin eeprom block for edid eeprom block for edid source driver (bottom bent) led backlight ass?y tclks lvds 2port vcc led driver block led driver block fb1~6 eeprom block for tcon operating eeprom block for tcon operating power block power block dvcc, avdd vgh, vgl, gma m i n i - l v d s gip clks, dsc vout_led dvcc vled led_en pwm 1080 1920 www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 5/ 26 lp173wf1 liquid crystal display ver. 1.0 jan.18.2010 2. absolute maximum ratings the following are maximum values which, if exceeded, may cause faulty operation or damage to the unit. table 1. absolute maximum ratings storage operation 10 20 30 40 50 60 70 80 0 -20 dry bulb temperature [ ] 10 % 20 % 40 % 60 % 90% 80% 0 10 20 30 40 50 60 wet bulb temperature [ ] humidity[(%)rh] parameter symbol values units notes min max power input voltage vcc -0.3 4.0 vdc at 25 5 c operating temperature t op 0 50 c 1 storage temperature h st -20 60 c 1 operating ambient humidity h op 10 90 %rh 1 storage humidity h st 10 90 %rh 1 note : 1. temperature and relative humidi ty range are shown in the figure below. wet bulb temperature should be 39 c max, and no condensation of water. www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 6/ 26 lp173wf1 liquid crystal display ver. 1.0 jan.18.2010 3. electrical specifications 3-1. electrical characteristics the lp173wf1 requires two power inputs. the first logic is employed to power the lcd electronics and to drive the tft array and liquid crysta l. the second backlight is the input about led bl.with led driver. parameter symbol values unit notes min typ max logic : power supply input voltage v cc 3.0 3.3 3.6 v 1 power supply input current i cc - 600 680 ma 2 power consumption p cc - 1.98 2.24 w 2 power supply inrush current i cc_p - 770 900 ma 4 lvds impedance z lvds 90 100 110 5 backlight : ( with led driver) led power input voltage v led 7.5 12.0 21.0 v 6 led power input current i led - 540 565 ma 7 led power consumption p led - 6.48 6.78 w 7 led power inrush current i led_p - 450 550 ma 8 pwm duty ratio 5 - 100 % 9 pwm jitter - 0 - 0.2 % 10 pwm impedance z pwm 20 40 60 k pwm frequency f pwm 200 - 1000 hz 11 pwm high level voltage v pwm_h 3.0 - 5.3 v pwm low level voltage v pwm_l 0 - 0.5 v led_en impedance z pwm 20 40 60 k led_en high voltage v led_en_h 3.0 - 5.3 v led_en low voltage v led_en_l 0 - 0.5 v life time 12,000 - - hrs 12 table 2. electrical characteristics www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 7/ 26 lp173wf1 liquid crystal display ver. 1.0 jan.18.2010 note) 1. the measuring position is the connector of lcm and the test condition is under 25 , fv = 60hz, black pattern. 2. the specified icc current and power consumption are under the vcc = 3.3v , 25 , fv = 60hz condition whereas mosaic pattern is displayed and fv is the frame frequency. 3. the below figures aire the measuring vcc condition and the vcc control block lgd used. the vcc condition is same the minimum of t1 at power on sequence. 4. this impedance value is needed to proper display and measured form lvds tx to the mating connector. 5. the measuring position is the connector of lcm and the test conditions are under 25 . 6. the current and power consumption with led driver are under the vled = 12.0v , 25 , dimming of max luminance whereas white pattern is displayed and fv is the frame frequency. 7. the below figures aire the measuring vled condition and the vled control block lgd used. vled control block is same with vcc control block. 8. the operation of led driver below minimum dimmi ng ratio may cause flickering or reliability issue. 9. if jitter of pwm is bigger than maximum. it may cause flickering. 10. this spec. is not effective at 100% dimming ra tio as an exception because it has dc level equivalent to 0hz. in spite of acceptable range as defined, the pwm frequency should be fixed and stable for more consistent brightness control at any specific level desired. 11. the life time is determined as the time at which t he typical brightness of lcd is 50% compare to that of initial value at the typical led current. these led backlight has 6 strings on it and the typical current of led?s string is base on 22ma. 10% 90% 0.5ms 3.3v 0v 10% 90% 0.5ms 12.0v 0v rising time vcc rising time v led www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 8/ 26 lp173wf1 liquid crystal display ver. 1.0 jan.18.2010 3-2. interface connections table 3. module connector pin configuration (cn1) this lcd employs two interface connections, a 40 pin c onnector is used for the module electronics interface and the other connector is used for the integral backlight system. the electronics interface connector is a model 20455-040e manufactured by uju & lsmtron pin symbol description notes 1 diag_loop buyer?s test loop to 34pin [interface chip] 1. lcd : sw, sw0617(lcd controller) including lvds receiver. 2. system : siwlvdsrx or equivalent * pin to pin compatible with lvds [connector] uju is050-l40b-c10 lsmtron gt05q-40s-h10 or equivalent [mating connector] 20345-#40e-## series or equivalent [connector pin arrangement] 2 vdd power supply (3.3v typ.) 3 vdd power supply (3.3v typ.) 4 v eedid ddc 3.3v power 5 bist panel self test 6 clk eedid ddc clock / smbus clock 7 data eedld ddc data / smbus data 8 odd_rin0- - lvds differential data input (r0-r5,g0) 9 odd_rin0+ + lvds differential data input (r0-r5,g0) 10 gnd ground 11 odd_rin1- - lvds differential data input (g1-g5,b0-b1) 12 odd_rin1+ + lvds differential data input (g1-g5,b0-b1) 13 gnd ground 14 odd_rin2- - lvds differential data input (b2-b5,hs,vs,de) 15 odd_rin2+ + lvds differential data input (b2-b5,hs,vs,de) 16 gnd ground 17 odd_clkin- - lvds differential clock input 18 odd_clkin+ + lvds differential clock input 19 gnd no connection 20 even rin0- - lvds differential data input (r0-r5,g0) 21 even rin0+ + lvds differential data input (r0-r5,g0) 22 gnd ground 23 even rin1- - lvds differential data input (g1-g5,b0-b1) 24 even rin1+ + lvds differential data input (g1-g5,b0-b1) 25 gnd ground 26 even rin2- - lvds differential data input (b2-b5,hs,vs,de) 27 even rin2+ + lvds differential data input (b2-b5,hs,vs,de) 28 gnd ground 29 even clkin- - lvds differential clock input 30 even clkin+ + lvds differential clock input 31 gnd led power return 32 gnd led power return 33 gnd led power return 34 diag_loop buyer?s test loop to 1pin 35 pwm pwm for luminance control 36 led_en bl on/off 37 nc no connection. 38 vled 7v-21v led power 39 vled 7v-21v led power 40 vled 7v-21v led power 1 40 www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 9/ 26 lp173wf1 liquid crystal display ver. 1.0 jan.18.2010 description symbol min max unit notes lvds clock to data skew margin t skew - 400 + 400 ps 85mhz > fclk 65mhz t skew - 600 + 600 ps 65mhz > fclk 25mhz lvds clock to clock skew margin (even to odd) t skew_eo -1/7 + 1/7 t clk - maximum deviation of input clock frequency during ssc f dev - 3 % - maximum modulation frequency of input clock during ssc f mod - 200 khz - description symb ol min max unit notes lvds differential voltage |v id | 100 600 mv - lvds common mode voltage v cm 0.6 1.8 v - lvds input voltage range v in 0.3 2.1 v - 3-3-1. dc specification 3-3-2. ac specification 3-3. lvds signal timing specifications www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 10/ 26 lp173wf1 liquid crystal display ver. 1.0 jan.18.2010 < clock skew margin between channel > < lvds data format > 3-3-3. data format 1) lvds 2 port < spread spectrum > time f center f max f min f mod 1 f center * f dev freq. www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 11/ 26 lp173wf1 liquid crystal display ver. 1.0 jan.18.2010 3-4. signal timing specifications table 5. timing table ( the standard of 60hz refresh rate) this is the signal timing required at the input of the us er connector. all of the interface signal timing should be satisfied with the following specifications and spec ifications of lvds tx/rx for its proper operation. note 2) this model don?t guarantee the image qua lity about flicker level and gate block/line dim at power saving mode with 50hz or 40 hz refresh rate. item symbol min typ max unit note dclk frequency f clk 71.2 74.9 78.6 mhz 2port hsync period t hp 1086 1138 1190 f clk 2port blanking total t hfp + t wh + t hbp 126 178 230 width-active t wha 960 960 960 vsync period t vp 1093 1097 1101 t hp blanking total t vfp + t wv + t vbp 13 17 21 width-active t wva 1080 1080 1080 note1) tentative timing table for 50hz refresh rate item symbol min typ max unit note dclk frequency f clk 59.3 62.4 65.5 mhz 2port hsync period t hp 1086 1138 1190 f clk 2port blanking total t hfp + t wh + t hbp 126 178 230 width-active t wha 960 960 960 vsync period t vp 1093 1097 1101 t hp blanking total t vfp + t wv + t vbp 13 17 21 width-active t wva 1080 1080 1080 note 2) tentative timing table for 40hz refresh rate (note 1) item symbol min typ max unit note dclk frequency f clk 47.5 49.9 52.4 mhz 2port hsync period t hp 1086 1138 1190 f clk 2port blanking total t hfp + t wh + t hbp 126 178 230 width-active t wha 960 960 960 vsync period t vp 1093 1097 1101 t hp blanking total t vfp + t wv + t vbp 13 17 21 width-active t wva 1080 1080 1080 www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 12/ 26 lp173wf1 liquid crystal display ver. 1.0 jan.18.2010 3-5. signal timing waveforms condition : v cc =3.3v low: 0.3vcc high: 0.7vcc hsync date enable vsync date enable t wh t hp t hfp t hbp t vp t wv t vbp t vfp t wha t wva www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 13/ 26 lp173wf1 liquid crystal display ver. 1.0 jan.18.2010 3-6. color input data reference the brightness of each primary color (red,green and blue) is based on the 6-bit gray scale data input for the color ; the higher the binary input, the brighter the color. the table below provides a reference for color versus data input. table 6. color data reference color input color data red msb lsb green msb lsb blue msb lsb r5 r4 r3 r2 r1 r0 g5 g4 g3 g2 g1 g0 b5 b4 b3 b2 b1 b0 basic color black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 red 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 green 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 blue 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 cyan 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 magenta 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 yellow 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 white 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 red red (00) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 red (01) 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 ? ? ? ? red (62) 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 red (63) 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 green green (00) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 green (01) 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 ... ? ? ? green (62) 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 green (63) 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 blue blue (00) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue (01) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 ? ? ? ? blue (62) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 blue (63) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 14/ 26 lp173wf1 liquid crystal display ver. 1.0 jan.18.2010 note) 1. do not insert the mating cable when system turn on. 2. valid data have to meet ?3-3. lvds signal timing specifications? 3. lvds, led_en and pwm need to pull-down condition on invalid status. 4. lgd recommend the rising sequence of vled after the vcc and valid status of lvds turn on. table 6. power sequence table led parameter value units min. typ. max. t 8 10 - - ms t 9 0 - - ms t 10 0 - - ms t 11 10 - - ms t 12 0.5 - - ms t 13 0 - 5000 ms logic parameter value units min. typ. max. t 1 0.5 - 10 ms t 2 0 - 50 ms t 3 0 - 50 ms t 4 400 - - ms t 5 200 - - ms t 6 200 - - ms t 7 3 - 10 ms 3-7. power sequence t 7 interface signal, v i lvds power supply input vcc 90% 10% 10% 0v 90% t 1 t 2 t 3 t 4 t 5 t 6 0v dimming control signal of led bl pwm 0v (low) t 8 led input voltage vled t 10 led on/off control signal led_en t 11 t 9 valid data 0v valid data 0v (off) 90% 10% t 12 90% 3.0v 3.0v 10% t 13 www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 15/ 26 lp173wf1 liquid crystal display ver. 1.0 jan.18.2010 4. optical specification fig. 1 optical characteristic measurement equipment and method table 8. optical characteristics ta=25 c, vcc=3.3v, f v =60hz, f clk = 97.75mhz, iled =tbd ma lcd module optical stage(x,y) equipment 500mm 50mm optical characteristics are determined after the unit has been ?on? and stable for approximately 20 minutes in a dark environment at 25 c . the values specified are at an approximate distance 50cm from the lcd surface at a viewing angle of and equal to 0 . fig. 1 presents additional information conc erning the measurement equipment and method. parameter symbol values units notes min typ max contrast ratio cr 400 500 - 1 surface luminance, white l wh 170 200 - cd/m 2 2 luminance variation white - 35% 3 response time tr r+ tr d - 8 16 ms 4 color coordinates red rx 0.620 0.650 0.680 ry 0.310 0.340 0.370 green gx 0.290 0.320 0.350 gy 0.606 0.636 0.666 blue bx 0.120 0.150 0.180 by 0.030 0.060 0.090 white wx 0.283 0.313 0.343 wy 0.299 0.329 0.359 viewing angle 5 x axis, right( =0 ) r 40 - - degree x axis, left ( =180) l 40 - - degree y axis, up ( =90 ) u 10 - - degree y axis, down ( =270) d 30 - - degree gray scale 6 color gamut c/g - 72 - % www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 16/ 26 lp173wf1 liquid crystal display ver. 1.0 jan.18.2010 gray level luminance [%] (typ) l0 0.11 l7 1.20 l15 5.23 l23 11.8 l31 20.6 l39 34.6 l47 53.3 l55 75.8 l63 100 note) 1. contrast ratio(cr) is defined mathematically as surface luminance with all white pixels contrast ratio = surface luminance with all black pixels 2. surface luminance is the average of 5 point across the lcd surface 50cm from the surface with all pixels displaying white. for more information see fig 1. lwh = average(l1,l2, ? l5) 3. the variation in surface luminance , the panel total variation ( white) is determined by measuring ln at each test position 1 through 13 and then defined as followed numerical formula. for more information see fig 2. maximum(l1,l2, ? l13) - minimum(l1,l2, ? l13) white( = * 100(%) maximum(l1,l2, ? l13) 4. response time is the time required for the display to transition from white to black (rise time, trr) and from black to white(decay time, trd). for additional information see fig 3. 5. viewing angle is the angle at which the contrast ratio is greater than 10. the angles are determined for the horizontal or x axis and the vertical or y axis with respect to the z axis which is normal to the lcd surface. for more information see fig 4. 6. gray scale specification * fv = 60hz www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 17/ 26 lp173wf1 liquid crystal display ver. 1.0 jan.18.2010 fig. 4 viewing angle normal y eye = 0 , right = 180 , left = 270 , down = 90 , up fig. 3 response time the response time is defined as the following figure and shall be measured by switching the input signal for ?black? and ?white?. tr r tr d 100 90 10 0 % optical response white black white fig. 2 luminance h a v b l4 l5 l1 l2 l3 center point d c h,v : active area a : h/5 mm b : v/5 mm c : v/10 mm d : h/10 mm points : 13 points l12 l7 l9 l10 l6 l11 l13 l8 www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 18/ 26 lp173wf1 liquid crystal display ver. 1.0 jan.18.2010 5. mechanical characteristics the contents provide general mechanical characteristics for the model lp173wf1. in addition the figures in the next page are detailed mechanical drawing of the lcd. outline dimension horizontal 398.1 0.50mm vertical 232.8 0.50mm depth 6.0mm(max.) bezel area horizontal 1.5mm min.( lager than active display area ) vertical 1.5mm min.( lager than active display area ) active display area horizontal 381.888mm vertical 214.812 mm weight 580g (max.) surface treatment 3h glare treatment of the front polarizer (haze 0%) mother glass thickness upper glass (c/f glass) 0.50 + 0.05 / -0.03 mm lower glass (tft glass) 0.50 + 0.05 / -0.03 mm www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 19/ 26 lp173wf1 liquid crystal display ver. 1.0 jan.18.2010 note) unit:[mm], general tolerance: 0.5mm www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 20/ 26 lp173wf1 liquid crystal display ver. 1.0 jan.18.2010 note) unit:[mm], general tolerance: 0.5mm www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 21/ 26 lp173wf1 liquid crystal display ver. 1.0 jan.18.2010 [ detail description of side mounting screw ] www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 22/ 26 lp173wf1 liquid crystal display ver. 1.0 jan.18.2010 6. reliability environment test condition { result evaluation criteria } there should be no change which might affect the practical display function when the display quality test is conducted under normal operating condition. no. test item conditions 1 high temperature storage test ta= 60 c, 240h 2 low temperature storage test ta= -20 c, 240h 3 high temperature operation test ta= 50 c, 50%rh, 240h 4 low temperature operation test ta= 0 c, 240h 5 vibration test (non-operating) sine wave, 5 ~ 150hz, 1.5g, 0.37oct/min 3 axis, 30min/axis 6 shock test (non-operating) half sine wave, 180g, 2ms one shock of each six faces(i.e. run 180g 2ms for all six faces) 7 altitude operating storage / shipment 0 ~ 10,000 feet (3,048m) 24hr 0 ~ 40,000 feet (12,192m) 24hr 8 image sticking 1) ta= 25 c, pattern : mosaic(8 by 6), operating time : 30 min lamp operating current : 6.0ma after 30 minutes : operating during 30 minutes with mosaic pattern(8 by 6), there is no image sticking after 10 second with half gray pattern. mosaic pattern(8 by 6) half gray 1) www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 23/ 26 lp173wf1 liquid crystal display ver. 1.0 jan.18.2010 7. international standards 7-1. safety a) ul 60950-1, second edition, underwriters laboratories inc. information technology equipment - safety - part 1 : general requirements. b) can/csa c22.2 no.60950-1-07, second edition, canadian standards association. information technology equipment - safety - part 1 : general requirements. d) iec 60950-1:2005, second edition, the in ternational electrotechnical commission (iec). information technology equipment - safety - part 1 : general requirements. 7-3. environment a) rohs, directive 2002/95/ec of the european parliament and of the council of 27 january 2003 7-2. emc a) ansi c63.4 ?american national standard for methods of measurement of radio-noise emissions from low-voltage electrical and electron ic equipment in the range of 9 khz to 40 ghz.? american national standards institute (ansi), 2003. b) cispr 22 ?information technology equipment ? radio disturbance characteristics ? limit and methods of measurement." international special committee on radio interference (cispr), 2005. c) cispr 13 ?sound and television broadcast receive rs and associated equipment ? radio disturbance characteristics ? limits and method of measurem ent." international special committee on radio interference (cispr), 2006. www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 24/ 26 lp173wf1 liquid crystal display ver. 1.0 jan.18.2010 8. packing 8-2. packing form a) package quantity in one box : 20pcs b) box size :490x390x298 8-1. designation of lot mark a) lot mark a b c d e f g h i j k l m a,b,c : size(inch) d : year e : month f ~ m : serial no. note 1. year 2. month mark year 0 2010 6 2006 7 2007 8 2008 9 2009 4 2004 5 2005 3 2 1 2003 2002 2001 b nov mark month a oct 6 jun 7 jul 8 aug 9 sep 4 apr 5 may c 3 2 1 dec mar feb jan b) location of lot mark serial no. is printed on the label. the label is attached to the backside of the lcd module. this is subject to change without prior notice. www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 25/ 26 lp173wf1 liquid crystal display ver. 1.0 jan.18.2010 9. precautions please pay attention to the followings when you use this tft lcd module. 9-1. mo unting precautions (1) you must mount a module using holes arranged in four corners or four sides. (2) you should consider the mounting structure so that uneven force (ex. twisted stress) is not applied to the module. and the case on which a module is mounted s hould have sufficient strength so that external force is not transmitted directly to the module. (3) please attach the surface transparent protective plat e to the surface in order to protect the polarizer. transparent protective plate should have sufficient strength in order to the resist external force. (4) you should adopt radiation structure to satisfy the temperature specification. (5) acetic acid type and chlorine type materials for the cover case are not desirable because the former generates corrosive gas of attacking the polarizer at high temperature and the latter causes circuit break by electro-chemical reaction. (6) do not touch, push or rub the exposed polarizers with glass, tweezers or anything harder than hb pencil lead. and please do not rub with dust clothes with chemical treatment. do not touch the surface of polarizer for bare hand or greasy cloth.(some cosmetics are detrimental to the polarizer.) (7) when the surface becomes dusty, please wipe gently wi th absorbent cotton or other soft materials like chamois soaks with petroleum benzene. normal-hexane is recommended for cleaning the adhesives used to attach front / rear polarizers. do not use acetone, toluene and alcohol because they cause chemical damage to the polarizer. (8) wipe off saliva or water drops as soon as possib le. their long time contact with polarizer causes deformations and color fading. (9) do not open the case because inside circuits do not have sufficient strength. 9-2. operating precautions (1) the spike noise causes the mis-operation of circuits. it should be lower than following voltage : v= 200mv(over and under shoot voltage) (2) response time depends on the temperature.(in lower temperature, it becomes longer.) (3) brightness depends on the temperature. (in lower temperature, it becomes lower.) and in lower temperature, response time(required time that brightness is stable after turned on) becomes longer. (4) be careful for condensation at sudden temperatur e change. condensation makes damage to polarizer or electrical contacted parts. and after fading condensation, smear or spot will occur. (5) when fixed patterns are displayed for a l ong time, remnant image is likely to occur. (6) module has high frequency circuits. sufficient suppression to the electromagnetic interference shall be done by system manufacturers. grounding and shielding methods may be important to minimized the interference. www.datasheet.co.kr datasheet pdf - http://www..net/
product specification 26/ 26 lp173wf1 liquid crystal display ver. 1.0 jan.18.2010 since a module is composed of electronic circuits, it is not strong to electrostatic discharge. make certain that treatment persons are connected to ground through wris t band etc. and don?t touch interface pin directly. 9-3. electrostatic discharge control strong light exposure causes degradation of polarizer and color filter. 9-4. precautions for strong light exposure 9-5. storage (1) when the protection film is peeled off, static el ectricity is generated between the film and polarizer. this should be peeled off slowly and carefully by people who are electrically grounded and with well ion-blown equipment or in such a condition, etc. (2) the protection film is attached to the polarizer with a small amount of glue. if some stress is applied to rub the protection film against the polarizer during the time you peel off the film, the glue is apt to remain on the polarizer. please carefully peel off the protection film without rubbing it against the polarizer. (3) when the module with protection film attached is stored for a long time, sometimes there remains a very small amount of glue still on the polarize r after the protection film is peeled off. (4) you can remove the glue easily. when the glue remains on the polarizer surface or its vestige is recognized, please wipe them off with absorbent cotton waste or other soft material like chamois soaked with normal-hexane. 9-6. handling precaution s for protection film when storing modules as spares for a long time, the following precautions are necessary. (1) store them in a dark place. do not expose the module to sunlight or fluorescent light. keep the temperature between 5 c and 35 c at normal humidity. (2) the polarizer surface should not come in contact with any other object. it is recommended that they be stored in the container in which they were shipped. www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of LP173WF1-TLC1

	To Download LP173WF1-TLC1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .